-
Coupling Rapid
Найменне: чыгунная арматура для трубы хуткая муфта SML
Памер: DN40-300
Матэрыял: нержавеючая сталь
Стандарт: EN877
ўстаноўка: муфта з нержавеючай сталі
Пакет: драўляны скрынь
Дастаўка: па моры
Тэрмін прыдатнасці: 50 гадоў
Тып B: хуткая муфта
Памер: DN40 да DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Каўнер захоп
Імя: чыгунная труба Муфта без ступіцах для sml
Памер: DN40-300
Матэрыял: нержавеючая сталь
Стандарт: EN877
ўстаноўка: дрэнажная труба SML труба
Упакоўка: скрынка
Дастаўка: па моры
Тэрмін прыдатнасці: 50 гадоў -
Муфта Konfix
Найменне: Злучальная муфта Konfix
Нямецкі нумар зацвярджэння: Z-42.5-299
Матэрыял: EPDM
Матэрыяльныя
Памер шрубы: шруба з папярочнай шчылінай, шырыня 7
Крутоўны момант: каля
: для злучэння SML-труб і фітынгаў з іншымі сістэмамі труб (матэрыялы) -
Заціскі EN877
Назва: чыгунныя фітынгі для трубаправодаў SML
Памер: DN40-300
Матэрыял: нержавеючая сталь
Стандарт: EN877
ўстаноўка: муфта з нержавеючай сталі
Пакет: драўляны скрынь
Дастаўка: па моры
Тэрмін прыдатнасці: 50 гадоў -
CHA CV муфта
Імя: чыгунная труба Муфта без ступіцах для sml
Памер: DN40-300
Матэрыял: нержавеючая сталь
Стандарт: EN877
ўстаноўка: дрэнажная труба SML труба
Упакоўка: скрынка
Дастаўка: па моры
Тэрмін прыдатнасці: 50 гадоў -
Цяжкі заціск
Назва: чыгунная арматура для трубы цяжкі заціск SML
Памер: DN40-300
Матэрыял: нержавеючая сталь
Стандарт: EN877
ўстаноўка: муфта з нержавеючай сталі
Пакет: драўляны скрынь
Дастаўка: па моры
Тэрмін прыдатнасці: 50 гадоў