-
CAST IRON SML PIPES (SMU PIPES, MA PIPES)
Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
Inside: fully cross-linked epoxy,thickness min.120μm
Outside: reddish brown base coat,thickness min.80μm -
NO HUB SML PIPE FITTINGS EN877
Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
Apart from the common EN877 cast iron fittings items such as bends, branches, caps and reductions, Dinsen also supplies special fittings such as bend with access door, branch with access, short pipe with door and anti-syphon trap etc.
Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
SML cast iron pipe fittings are internally and externally finished with a reddish brown epoxy coating to prevent from fouling and corrosion.
Inside and Outside: fully cross-linked epoxy,thickness min.60μm -
Flange pipe
A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between the two mating flanges to provide a tighter seal. These flanges are either custom with dimensions provided by the customer or they are manufactured according to published specifications. -
Rectangle pipes
SML Rectangle pipes, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
Reducer
Reducer is used to connect pipes and fittings of different sizes.
Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock. -
Double branch 68°/88°
Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.
Two different angles are available in the option, these being 68 and 88 degrees. -
88°Single branch
China supplier EN877 SML single branch
Degree: 88°
Size: DN50-DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
Payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Bend with door
Bend with door SML
Foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
88° bend
Cast Iron SML 88°Bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Standard:EN877 -
Double short bend
EN877 cast iron fitting double short bend 88°
EN877 чугунные арматуры двойной короткий изгиб 88°
degree: 88°
size: DN50-DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
88°Corner branch
Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.
The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing. -
Flange ring
A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal.