• linkedin
  • Facebook
  • cvrlikání
Slouží poskytovatelům prémiových litinových řešení.
Odkaz

Upevňovací a podpůrná svorka potrubí

  • Coupling  Rapid

    Coupling Rapid

    Název: litinové potrubní tvarovky rychlospojka SML
    Velikost: DN40-300
    Materiál: nerezová ocel
    Standard: EN877
    instalace: nerezová spojka
    Balení: dřevěná bedna
    Dodávka: po moři
    Skladovatelnost: 50 let

    Typ B: rychlospojka
    Velikost: DN40 až DN200
  • American Hose Clamp Type Throat Hoop

    American Hose Clamp Type Throat Hoop

    The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.

    Product presentation:
    1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
    2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
    3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
    4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
    5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.

    The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
    It is mainly divided into British, American, and German three types.
    American throat band: divided into iron plating galvanized and stainless steel two kinds.
    All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product.
  • Úchop límce

    Úchop límce

    Název: litinová trubka Spojka bez náboje pro sml
    Velikost: DN40-300
    Materiál: nerezová ocel
    Standard: EN877
    instalace: odtoková trubka SML trubka
    Balení: krabička
    Dodání: po moři
    Skladovatelnost: 50 let
  • Spojka Konfix

    Spojka Konfix

    Název: Spojka
    Konfix Německé číslo schválení: Z-42.5-299
    Materiál: EPDM
    Materiál zajišťovacích dílů: W2, šneková svorka nerezová ocel 1.4016, šroub bez chromu
    Velikost šroubu: šroub s křížovou drážkou, šířka 7
    Kroutící moment: ca. 2 Nm
    Použití: Pro připojení SML trubek a tvarovek k jiným potrubním systémům (materiálům)
  • Svorky EN877

    Svorky EN877

    Název: litinové potrubní spojky SML
    Velikost: DN40-300
    Materiál: nerezová ocel
    Standard: EN877
    instalace: nerezová spojka
    Balení: dřevěná bedna
    Dodání: po moři
    Skladovatelnost: 50 let
  • Spojka CHA CV

    Spojka CHA CV

    Název: litinová trubka Spojka bez náboje pro sml
    Velikost: DN40-300
    Materiál: nerezová ocel
    Standard: EN877
    instalace: odtoková trubka SML trubka
    Balení: krabička
    Dodání: po moři
    Skladovatelnost: 50 let
  • Těžká svorka

    Těžká svorka

    Název: litinové potrubní armatury těžká spona SML
    Velikost: DN40-300
    Materiál: nerezová ocel
    Standard: EN877
    instalace: nerezová spojka
    Balení: dřevěná bedna
    Dodání: po moři
    Skladovatelnost: 50 let