• linkedin
  • facebook
  • twitter
Serves premium cast iron solution providers.
Link

SML/BML/KML/TML/MLK Pipes

  • Cast Iron SML Pipes

    Cast Iron SML Pipes

    Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
    EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
    Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
    SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
    Inside: fully cross-linked epoxy,thickness min.120μm
    Outside: reddish brown base coat,thickness min.80μm
  • BML/TML/KML/MLK   Pipe

    BML/TML/KML/MLK Pipe

    EN877 KML cast iron pipe
    Sizes: DN40 to DN400, including DN70 and DE75 for part European market
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,grease-containing waste water,pollution discharge,rain water
    Painting:
    Outside:thermal spray zinc coating min.130g/m2 + top coat grey expoxy resin min.60μm (as you requirement)
    Inside:fully cross-linked epoxy,double layer thickness min.240μm
    payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity.
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • EN877 BML Bridge Pipe

    EN877 BML Bridge Pipe

    DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.

    The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.





  • EN877 TML Cast Iron Pipe

    EN877 TML Cast Iron Pipe

    EN877 TML cast iron pipe
    Sizes: DN40 to DN400, including DN70 and DE75 for part European market
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge, waste water,rain water
    Painting:
    Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
    Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
    payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity.
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection