-
Coupling Rapid
Denumire: fitinguri pentru conducte din fontă cuplare rapidă SML
Dimensiune: DN40-300
Material: oțel inoxidabil
Standard: EN877
instalare: cuplaj din oțel inoxidabil
Pachet: ladă din lemn
Livrare: pe mare
Termen de valabilitate: 50 de ani
Tip B: cuplare rapidă
Dimensiune: DN40 până la DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Guler de prindere
Nume: țeavă din fontă Cuplaj fără butuc pentru sml
Dimensiune: DN40-300
Material: oțel inoxidabil
Standard: EN877
instalare: țeavă de drenaj Tevi SML
Pachet: cutie
Livrare: pe mare
Termen de valabilitate: 50 de ani -
Cuplaj Konfix
Denumire: cufix Konfix
Nr. De aprobare germană: Z-42.5-299
Material: EPDM
Material piese de blocare: W2, clemă filet melcat din oțel inoxidabil 1.4016, șurub fără crom
Dimensiune șurub: șurub cu fante transversale, lățime 7
Cuplu: cca.
: Pentru conectarea țevilor și fitingurilor SML cu alte sisteme de țevi (materiale) -
Cleme EN877
Denumire: fitinguri pentru conducte din fontă cleme SML
Dimensiune: DN40-300
Material: oțel inoxidabil
Standard: EN877
instalare: cuplaj din oțel inoxidabil
Pachet: ladă din lemn
Livrare: pe mare
Termen de valabilitate: 50 de ani -
Cuplaj CV CHA
Nume: țeavă din fontă Cuplaj fără butuc pentru sml
Dimensiune: DN40-300
Material: oțel inoxidabil
Standard: EN877
instalare: țeavă de drenaj Tevi SML
Pachet: cutie
Livrare: pe mare
Termen de valabilitate: 50 de ani -
Clemă grea
Nume: fitinguri din fontă clemă grea SML
Dimensiune: DN40-300
Material: oțel inoxidabil
Standard: EN877
instalare: cuplaj din oțel inoxidabil
Pachet: ladă din lemn
Livrare: pe mare
Termen de valabilitate: 50 de ani