• linkedin
  • facebook
  • twitter
Serves premium cast iron solution providers.
Link

SML pipe fitting

  • NoHub-SML P-Trap

    NoHub-SML P-Trap

    Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap.
  • No Hub- SML 88°Corner branch

    No Hub- SML 88°Corner branch

    Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.

    The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing.
  • Hubless-SML Round Access Pipe

    Hubless-SML Round Access Pipe

    SML Round pipes, foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • No Hub-SML Flange pipe

    No Hub-SML Flange pipe

    A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between the two mating flanges to provide a tighter seal. These flanges are either custom with dimensions provided by the customer or they are manufactured according to published specifications.
  • Hubless-SML Rectangle  Access Pipe

    Hubless-SML Rectangle Access Pipe

    SML Rectangle pipes, foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • No Hub-SML Reducer

    No Hub-SML Reducer

    Reducer is used to connect pipes and fittings of different sizes.
    Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock.
  • Hubless-SML Double branch 68°/88°

    Hubless-SML Double branch 68°/88°

    Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.

    Two different angles are available in the option, these being 68 and 88 degrees.
  • Hubless-SML 88°Single branch

    Hubless-SML 88°Single branch

    China supplier EN877 SML single branch

    Degree: 88°
    Size: DN50-DN300
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
    Payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • No Hub-SML Bend with door

    No Hub-SML Bend with door

    Bend with door SML
    Foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • No Hub-SML 88° Bend

    No Hub-SML 88° Bend

    Cast Iron SML 88°Bend

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Standard:EN877
  • No Hub-SML Double short bend 88°

    No Hub-SML Double short bend 88°

    EN877 cast iron fitting double short bend 88°
    EN877 чугунные арматуры двойной короткий изгиб 88°
    degree: 88°
    size: DN50-DN300
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
    payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity.
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • No Hub-SML 45° Double Branch

    No Hub-SML 45° Double Branch

    Double branch.
    45° between pipe and branches.

    Designed in accordance with standard EN877,used for connection between pipes and pipes.
12 Next > >> Page 1 / 2