PRODUCT DESCRIPTION
The pipeline inspection endoscope includes a display screen, a dual-camera cable, and multiple function buttons. The camera and the screen are connected by a spring cable. The device can achieve the effects of lens rotation, connector switching, and power on/off by pressing the control buttons. It is safe to use and easy to operate.
1. Connect the two plugs of the main unit and the lens and tighten the screws.
2. After turning on the power, the screen will display the image information collected by the current camera.
3. Camera switching, Press the camera switching button, and the image displayed on the screen will switch from camera A to camera B.
4. Camera rotation function
There are two buttons for left rotation and right rotation, which can be pressed as needed. When the button is pressed, the camera will rotate accordingly.
5. The power button in the screen setting area can control the power on/off. Press and hold for 3 seconds to turn on, and press briefly to turn off when the device is on.
6. The key shown in the following figure is the light brightness adjustment key. The light brightness has three levels: high, medium, and low. The default is the lowest level when the device is turned on. Press briefly to cycle through the adjustment of the light in front of the lens.
PRODUCT DATA
Battery capacity: 3500mAh
Charging voltage: 12.6V 1AH
Charging time: Approximately 4 hours to fully charge
Discharging time: Approximately 4-6 hours
Empty weight: Approximately 2.5KG
