-
ASTM A888 Hubless Pipe
ASTM A888 drainage cast iron pipe fittings
ASTM A888 дренажные фитинги чугунные
Sizes:
degree:
Standard: ASTM A888
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Bitumen
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
This system is intended for use in non-pressure applications such as sanitary drain, waste, and vent (DWV), sewer, and storm drainage applications.
Dinsen supplies all range of hubless cast iron soil pipe and fittings from DN40 up to DN300. All of our cast iron pipe and fittings are produced severely
according to ASTM A888. It can be used in all type of buildings compatibly. -
Socket Cast Iron Pipes for Rainwater pipe system
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water. -
SME Cast Iron Pipes for below ground drainage system
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
-
Square Pipes gutter for rain water system
We supply a complete range of Rainwater pipes and fittings as well gutters.
cast iron rainwater pipe products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
-
Cast Iron SML Pipe (SMU PIPES, MA PIPES)
Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
Inside: fully cross-linked epoxy,thickness min.120μm
Outside: reddish brown base coat,thickness min.80μm -
BML/TML/KML/MLK Pipe
EN877 KML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,grease-containing waste water,pollution discharge,rain water
Painting:
Outside:thermal spray zinc coating min.130g/m2 + top coat grey expoxy resin min.60μm (as you requirement)
Inside:fully cross-linked epoxy,double layer thickness min.240μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Ductile Iron Pipe [EN545]
Ductile iron pipes and fittings
Pipe Size: DN80-DN1000
Fittings Size: DN80-DN1600
Ductile Iron Pipe: 150,000 Tons/Year
Surface Treating: Bitumen coating
Epoxy coating (Blue and Red color)
Seal coating (On the cement surface)
Standards: ISO2531; EN545, EN598;
Zinc coating: Standard: ISO8179
Average Mass ≥130g/㎡;
Partial Lowest : ≥ 110g/㎡
Mass Can be Customized:200g/m2 400g/m2 Zn-Al alloy -
Cast Iron Rainwater Pipes
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water. -
EN877 BML Bridge Pipe
DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.
-
EN877 TML Cast Iron Pipe
EN877 TML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge, waste water,rain water
Painting:
Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN598 DI Pipe
Ductile iron pipes and fittings
Pipe Size: DN80-DN1000
Fittings Size: DN80-DN1600
Ductile Iron Pipe: 150,000 Tons/Year
Surface Treating: Bitumen coating
Epoxy coating (Blue and Red color)
Seal coating (On the cement surface)
Standards: ISO2531; EN545, EN598;
Zinc coating: Standard: ISO8179
Average Mass ≥130g/㎡;
Partial Lowest : ≥ 110g/㎡
Mass Can be Customized:200g/m2 400g/m2 Zn-Al alloy