-
Hand Held Pipe Cutter
Blade size: 42mm, 63mm, 75mm
Shank length: 235-275mm
Blade length: 50-85mm
Tip angle: 60
Blade material: SK5 imported steel with Teflon coating on the surface
Shell material: aluminum alloy
Features: self-locking ratchet, adjustable gear, prevent rebound
Teflon coating makes the pipe cutting machine have good performance as follows:
1.Non-stick: Almost all substances are not bonded to the Teflon coating. Very thin films also exhibit good non-stick properties.
2. Heat resistance: Teflon coating has excellent heat resistance and low temperature resistance. It can withstand high temperature up to 260°C in a short period of time, and can be used continuously between 100°C and 250°C in general. It has remarkable thermal stability. It can work at freezing temperatures without embrittlement, and does not melt at high temperatures.
3. Slidability: Teflon coating film has a low friction coefficient, and the friction coefficient is only between 0.05-0.15 when the load is sliding. -
ASTM A888 Hubless Pipe
ASTM A888 drainage cast iron pipe fittings
ASTM A888 дренажные фитинги чугунные
-
NoHub-SML P-Trap
Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap. -
No Hub- SML 88°Corner branch
Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.
The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing. -
Hubless-SML Round Access Pipe
SML Round pipes, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
Hot New Products ——Loose Flanges for Ductile Iron Pipe (China En545 PN16)
Fittings for socket joints
Collar T type and K type
Double Socket Bend 90° (1/4)
Double Socket Bend 45° (1/8)
Double Socket Bend 22.5° (1/16)
Double Socket Bend 11.25° (1/32)
All socket tee
All socket tee with 45°Angle branch
Double-socket tee with flanged branch
Double socket taper
All socket crossing
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
Socket Cast Iron Pipes for Rainwater pipe system
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water. -
SME Cast Iron Pipes for below ground drainage system
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
-
Square Pipes gutter for rain water system
We supply a complete range of Rainwater pipes and fittings as well gutters.
cast iron rainwater pipe products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
-
Konfix coupling
Name: Konfix coupling
German Approval no.: Z-42.5-299
Material: EPDM
Material locking parts: W2, worm thread clamp stainless steel 1.4016,screw free of chrome
Screw size: cross-slit screw, width 7
Torque: ca. 2 Nm
Application: For connecting SML pipes and fittings with other pipe systems(materials) -
T-bolt hose clamps -W2 ORW4
Material: W2-bolt And Nut With Zinc Plated Steel
the Rest With StainlessSteel300
W4-All Stainless Steel 300
Clamps are designed for high performance and long-term durability and are manufactured to the highest quality standards. Designed for a variety of automotive, industrial and marine applications.
Other specifications can be customized according to requirements -
Heavy duty clamp with small spring
Material: W2-bolt And Nut With Zinc Plated Steel
the Rest With StainlessSteel300
© Copyright - 2010-2024 : All Rights Reserved by Dinsen
Featured Products - Hot Tags - Sitemap.xml - AMP Mobile
Dinsen aims to learn from world famous enterprise like Saint Gobain to become a responsible, trusty company in China to keep improving the human being life!
