-
RTD-E Single plate-type pipeline repair clamp
Name:RTD-E Single plate-type pipeline repair clamp
Diameter range: 59-118
Material: stainless steel
Shell: Stainless steel AISI304，AISI316L，AISI316Ti,
Seal ring：EPDM,NBR
Additionally; optional H NBR MVQ,VITON A
Fastening ：Anti-corrosion Dacromet treatment of heavy-duty
bolts, pins stainless steel,PTFE accessories can also be selected -
RTD-F Double plate-type pipeline repair clamp
Name:RTD-F Double plate-type pipeline repair clamp
Diameter range: 59-118
Material: stainless steel
Shell: Stainless steel AISI304，AISI316L，AISI316Ti,
Seal ring：EPDM,NBR
Additionally; optional H NBR MVQ,VITON A
Fastening ：Anti-corrosion Dacromet treatment of heavy-duty
bolts, pins stainless steel,PTFE accessories can also be selected -
RTD-D Double-clip pipeline repair clamp
Name:RTD-D Double-clip pipeline repair clamp
Size: DN25-500
Material: stainless steel
Shell： Stainless steelAISI304，AISI316L，AISI316Ti,
Seal ring：EPDM,NBR
Additionally; optional H NBR MVQ,VITON A
Fastening ：Anti-corrosion Dacromet treatment of heavy-duty
bolts, pins stainless steel,PTFE accessories can also be selected -
RTD-C Single-clip pipeline repair clamp
Name: RTD-C Single-clip pipeline repair clamp
Size: DN25-500
Material: stainless steel
Shell： Stainless steel AISI304/AISI316U/AISI316T
Seal ring：EPDM,NBR
Additionally; optional H NBR MVQ,VITON A
Fastening ：Anti-corrosion Dacromet treatment of heavy-duty
bolts, pins stainless steel,PTFE accessories can also be selected -
Coupling Rapid
Name: cast iron pipe fittings rapid coupling SML
Size: DN40-300
Material: stainless steel
Standard: EN877
installation: stainless steel coupling
Package: wooden crate
Delivery: by sea
Shelf life: 50 years
Type B: rapid coupling
Size: DN40 to DN200 -
Hand Held Pipe Cutter
Blade size: 42mm, 63mm, 75mm
Shank length: 235-275mm
Blade length: 50-85mm
Tip angle: 60
Blade material: SK5 imported steel with Teflon coating on the surface
Shell material: aluminum alloy
Features: self-locking ratchet, adjustable gear, prevent rebound
Teflon coating makes the pipe cutting machine have good performance as follows:
1.Non-stick: Almost all substances are not bonded to the Teflon coating. Very thin films also exhibit good non-stick properties.
2. Heat resistance: Teflon coating has excellent heat resistance and low temperature resistance. It can withstand high temperature up to 260°C in a short period of time, and can be used continuously between 100°C and 250°C in general. It has remarkable thermal stability. It can work at freezing temperatures without embrittlement, and does not melt at high temperatures.
3. Slidability: Teflon coating film has a low friction coefficient, and the friction coefficient is only between 0.05-0.15 when the load is sliding. -
ASTM A888 Hubless Pipe
ASTM A888 drainage cast iron pipe fittings
ASTM A888 дренажные фитинги чугунные
-
NoHub-SML P-Trap
Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap. -
No Hub- SML 88°Corner branch
Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.
The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing. -
Hubless-SML Round Access Pipe
SML Round pipes, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
Hot New Products ——Loose Flanges for Ductile Iron Pipe (China En545 PN16)
Fittings for socket joints
Collar T type and K type
Double Socket Bend 90° (1/4)
Double Socket Bend 45° (1/8)
Double Socket Bend 22.5° (1/16)
Double Socket Bend 11.25° (1/32)
All socket tee
All socket tee with 45°Angle branch
Double-socket tee with flanged branch
Double socket taper
All socket crossing
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
Socket Cast Iron Pipes for Rainwater pipe system
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
© Copyright - 2010-2024 : All Rights Reserved by Dinsen Featured Products - Hot Tags - Sitemap.xml - AMP Mobile
Dinsen aims to learn from world famous enterprise like Saint Gobain to become a responsible, trusty company in China to keep improving the human being life!
