-
Pipe cutter
Product name: Pipe cutter
Voltage: 220-240V (50-60HZ)
Saw blade center hole: 62mm
Product power: 1000W
Saw blade diameter: 140mm
Load speed: 3200r/min
Scope of use: 15-220mm，75-415mm
Product Weight: 7.2kg
Maxthickness: Steel 8mm, Plastic 12mm, Stainless steel 6mm
Cutting material: Cutting steel, plastic, copper, cast iron, stainless steel and multilayer tubes
Advantages and innovations: precision cutting;cutting method is simple;high safety;lightweight, easy to carry and easy to operate on-site;cutting will not produce sparks and dust to the outside world;inexpensive, cost-effective. -
No Hub-SML Flange pipe
A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between the two mating flanges to provide a tighter seal. These flanges are either custom with dimensions provided by the customer or they are manufactured according to published specifications. -
Hubless-SML Rectangle Access Pipe
SML Rectangle pipes, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
No Hub-SML Reducer
Reducer is used to connect pipes and fittings of different sizes.
Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock. -
Hubless-SML Double branch 68°/88°
Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.
Two different angles are available in the option, these being 68 and 88 degrees. -
Hubless-SML 88°Single branch
China supplier EN877 SML single branch
Degree: 88°
Size: DN50-DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
Payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
No Hub-SML Bend with door
Bend with door SML
Foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
No Hub-SML 88° Bend
Cast Iron SML 88°Bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Standard：EN877 -
No Hub-SML Double short bend 88°
EN877 cast iron fitting double short bend 88°
EN877 чугунные арматуры двойной короткий изгиб 88°
degree： 88°
size： DN50-DN300
Standard： EN877
Material： Grey iron
Application： Construction drainage,pollution discharge,waste water rain water
Painting： inside and outside fully cross-linked epoxy,thickness min.60μm
payment term： T/T, L/C, or D/P
Production capacity： 1500 tons/ month
Delivery time： 20-30 days, depend on your quantity.
MOQ： 1*20 container
Features： Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Flange ring
A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. -
No Hub-SML 45° Double Branch
Double branch.
45° between pipe and branches.
Designed in accordance with standard EN877，used for connection between pipes and pipes. -
EN877 BML Bridge Pipe
DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.
© Copyright - 2010-2024 : All Rights Reserved by Dinsen Featured Products - Hot Tags - Sitemap.xml - AMP Mobile
Dinsen aims to learn from world famous enterprise like Saint Gobain to become a responsible, trusty company in China to keep improving the human being life!
