• sns03
  • sns01
  • sns02
Serves premium drainage solution providers.

Products

  • SML P-Trap

    SML P-Trap

    Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap.
  • 88°Large Radius Bend with Access Door

    88°Large Radius Bend with Access Door

    SML 88°Large Radius Bend with Access Door, foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.


  • 88°Large bend

    88°Large bend

    Cast Iron SML 88°Large bend

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Agrement EN 877
  • SML Top bend

    SML Top bend

    EN877 SML Top bend
    Material: Grey Cast Iron
    Coating: SML,KML,BML,TML
    Product description:The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
  • SML Vent bend

    SML Vent bend

    SML Vent bend
    Material: Grey Cast Iron
    Coating: SML,KML,BML,TML
    Product description:The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
  • 45°Cast iron bend

    45°Cast iron bend

    Cast Iron SML 45°Bend Cast iron

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Agrement EN 877
  • floor drain

    floor drain

    A floor drain is a plumbing fixture that is installed in the floor of a structure, mainly designed to remove any standing water near it.
    Floor drain DN200*100
  • 88° bend with 250mm

    88° bend with 250mm

    Dimensions
    Size : 250mm
    Bend Angle : 88°

    Description
    Easy to install our Sewer drainage range includes solid pipe and fittings. A combined lip and compression seal into its solid pipe which is secure against dislodgement and makes jointing easier ensuring that joints remain leak free for years to come.
  • 45° branch

    45° branch

    Double branch. 45° between pipe and branches. 180° between branches

    Designed in accordance with standard EN877
  • 45° bend with 250mm

    45° bend with 250mm

    Dimensions
    Size : 250mm
    Bend Angle : 45°

    Description
    Easy to install our Sewer drainage range includes solid pipe and fittings. A combined lip and compression seal into its solid pipe which is secure against dislodgement and makes jointing easier ensuring that joints remain leak free for years to come.
  • EN877 BML Pipe Fittings

    EN877 BML Pipe Fittings

    DS MLB (BML) Bridge drainage pipe fittings is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.

    The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.



  • EN545 DI Pipe

    EN545 DI Pipe

    Ductile iron pipes and fittings

    Pipe Size: DN80-DN1000
    Fittings Size: DN80-DN1600
    Ductile Iron Pipe: 150,000 Tons/Year
    Surface Treating: Bitumen coating
    Epoxy coating (Blue and Red color)
    Seal coating (On the cement surface)
    Standards: ISO2531; EN545, EN598;
    Zinc coating: Standard: ISO8179
    Average Mass ≥130g/㎡;
    Partial Lowest : ≥ 110g/㎡
    Mass Can be Customized:200g/m2 400g/m2 Zn-Al alloy