• sns03
  • sns01
  • sns02
Serves premium drainage solution providers.

Products

  • Pipe cutter

    Pipe cutter

    Product name: Pipe cutter
    Voltage: 220-240V (50-60HZ)
    Saw blade center hole: 62mm
    Product power: 1000W
    Saw blade diameter: 140mm
    Load speed: 3200r/min
    Scope of use: 15-220mm,75-415mm
    Product Weight: 7.2kg
    Maxthickness: Steel 8mm, Plastic 12mm, Stainless steel 6mm
    Cutting material: Cutting steel, plastic, copper, cast iron, stainless steel and multilayer tubes
    Advantages and innovations: precision cutting;cutting method is simple;high safety;lightweight, easy to carry and easy to operate on-site;cutting will not produce sparks and dust to the outside world;inexpensive, cost-effective.
  • Supply ODM China Sml Epoxy Coated Cast Iron Pipe

    Supply ODM China Sml Epoxy Coated Cast Iron Pipe

    Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
    EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
    Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
    SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
    Inside: fully cross-linked epoxy,thickness min.120μm
    Outside: reddish brown base coat,thickness min.80μm
  • Hot-selling SML/SMU China Cast Iron Epoxy Pipes

    Hot-selling SML/SMU China Cast Iron Epoxy Pipes

    Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
    EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
    Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
    SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
    Inside: fully cross-linked epoxy,thickness min.120μm
    Outside: reddish brown base coat,thickness min.80μm
  • Epoxy powder pipe

    Epoxy powder pipe

    Dinsen also supplies a comprehensive range of FBE drainage pipe and fittings from DN 40 up to DN 300. FBE cast iron pipes are coated inside and
    outside with powder epoxy by fusion bonded. This new kind of coating`s thickness can reaching 200μm. Apart from the simple cast iron fittings such
    as bends, branches and reductions, Dinsen also supplies special cast iron fittings such as double short bend, rectangle access pipe.
  • Flange ring

    Flange ring

    A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal.
  • Flange pipe

    Flange pipe

    A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between the two mating flanges to provide a tighter seal. These flanges are either custom with dimensions provided by the customer or they are manufactured according to published specifications.
  • DS Off-set

    DS Off-set

    DS CAST IRON Off-set
    Cast Iron Fixed Offset Bend is available with a 130mm projection, and is used to direct a soil system around cornered obstructions, whilst keeping the system parallel. The bend is manufactured to EN877 using solid cast iron and finished with a Epoxy paint coating that complements the aesthetic of period buildings.
  • Cap with seal

    Cap with seal

    It is constructed of high quality cast iron. It is easy to install.
    For use where a watertight seal is needed
  • Round pipes

    Round pipes

    SML Round pipes, foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • 88°Corner branch

    88°Corner branch

    Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.

    The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing.
  • Double branch 68°/88°

    Double branch 68°/88°

    Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.

    Two different angles are available in the option, these being 68 and 88 degrees.
  • 45°Single branch

    45°Single branch

    Used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main soil stack. The 135 degree angle introduces a steeper fall to the horizontal run than a standard 92.5 or 112.5 degree branch. It is most commonly found on the outside wall of a building, often on blocks of flats or apartments.