• sns03
  • sns01
  • sns02
Serves premium drainage solution providers.

Products

  • Pipe cutter

    Pipe cutter

    Product name: Pipe cutter
    Voltage: 220-240V (50-60HZ)
    Saw blade center hole: 62mm
    Product power: 1000W
    Saw blade diameter: 140mm
    Load speed: 3200r/min
    Scope of use: 15-220mm,75-415mm
    Product Weight: 7.2kg
    Maxthickness: Steel 8mm, Plastic 12mm, Stainless steel 6mm
    Cutting material: Cutting steel, plastic, copper, cast iron, stainless steel and multilayer tubes
    Advantages and innovations: precision cutting;cutting method is simple;high safety;lightweight, easy to carry and easy to operate on-site;cutting will not produce sparks and dust to the outside world;inexpensive, cost-effective.
  • Flange pipe

    Flange pipe

    A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts. A gasket is inserted between the two mating flanges to provide a tighter seal. These flanges are either custom with dimensions provided by the customer or they are manufactured according to published specifications.
  • Rectangle pipes

    Rectangle pipes

    SML Rectangle pipes, foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • Reducer

    Reducer

    Reducer is used to connect pipes and fittings of different sizes.
    Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock.
  • Double branch 68°/88°

    Double branch 68°/88°

    Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.

    Two different angles are available in the option, these being 68 and 88 degrees.
  • 88°Single branch

    88°Single branch

    China supplier EN877 SML single branch

    Degree: 88°
    Size: DN50-DN300
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
    Payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • Bend with door

    Bend with door

    Bend with door SML
    Foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • 88° bend

    88° bend

    Cast Iron SML 88°Bend

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Standard:EN877
  • Double short bend

    Double short bend

    EN877 cast iron fitting double short bend 88°
    EN877 чугунные арматуры двойной короткий изгиб 88°
    degree: 88°
    size: DN50-DN300
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
    payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity.
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • 88°Corner branch

    88°Corner branch

    Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.

    The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing.
  • Flange ring

    Flange ring

    A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal.
  • 45° double branch

    45° double branch

    Double branch.
    45° between pipe and branches.

    Designed in accordance with standard EN877,used for connection between pipes and pipes.