-
No Hub-SML Reducer
Reducer is used to connect pipes and fittings of different sizes.
Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock. -
Hubless-SML Double branch 68°/88°
Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.
Two different angles are available in the option, these being 68 and 88 degrees. -
Hubless-SML 88°Single branch
China supplier EN877 SML single branch
Degree: 88°
Size: DN50-DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
Payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
No Hub-SML Bend with door
Bend with door SML
Foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
No Hub-SML 88° Bend
Cast Iron SML 88°Bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Standard：EN877 -
No Hub-SML Double short bend 88°
EN877 cast iron fitting double short bend 88°
EN877 чугунные арматуры двойной короткий изгиб 88°
degree： 88°
size： DN50-DN300
Standard： EN877
Material： Grey iron
Application： Construction drainage,pollution discharge,waste water rain water
Painting： inside and outside fully cross-linked epoxy,thickness min.60μm
payment term： T/T, L/C, or D/P
Production capacity： 1500 tons/ month
Delivery time： 20-30 days, depend on your quantity.
MOQ： 1*20 container
Features： Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Flange ring
A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. -
No Hub-SML 45° Double Branch
Double branch.
45° between pipe and branches.
Designed in accordance with standard EN877，used for connection between pipes and pipes. -
No Hub-SML DS Offset Bend
DS CAST IRON Off-set
Cast Iron Fixed Offset Bend is available with a 130mm projection, and is used to direct a soil system around cornered obstructions, whilst keeping the system parallel. The bend is manufactured to EN877 using solid cast iron and finished with a Epoxy paint coating that complements the aesthetic of period buildings. -
No Hub-SML Cap with Rubber Seal
It is constructed of high quality cast iron. It is easy to install.
For use where a watertight seal is needed -
No Hub-SML 45°Single branch
Used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main soil stack. The 135 degree angle introduces a steeper fall to the horizontal run than a standard 92.5 or 112.5 degree branch. It is most commonly found on the outside wall of a building, often on blocks of flats or apartments. -
No Hub-SML 88°Large Radius Bend with Access Door
SML 88°Large Radius Bend with Access Door, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
© Copyright - 2010-2024 : All Rights Reserved by Dinsen Featured Products - Hot Tags - Sitemap.xml - AMP Mobile
Dinsen aims to learn from world famous enterprise like Saint Gobain to become a responsible, trusty company in China to keep improving the human being life!
