• linkedin
  • facebook
  • twitter
Serves premium cast iron solution providers.
Link

HIDE

  • Hot Sale for En877 Cast Iron Drainage Soil Pipes-Nohub Sml Reducer

    Hot Sale for En877 Cast Iron Drainage Soil Pipes-Nohub Sml Reducer

    Reducer is used to connect pipes and fittings of different sizes.
    Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock.
  • SML pipe fitting-Nohub Sml p-Trap

    SML pipe fitting-Nohub Sml p-Trap

    Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap.
  • ISO6594/En877/ASTM A888 Hubless Cast Iron Pipes–Bend with door

    ISO6594/En877/ASTM A888 Hubless Cast Iron Pipes–Bend with door

    Bend with door SML
    Foul and surface water drainage system
    Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
  • En877 Kml pipe fittings

    En877 Kml pipe fittings

    KML cast iron pipe fittings EN877
    KML фитинги чугунные EN877
    Sizes: DN40 to DN400, including DN70 and DE75 for part European market
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: Inside and Outside are grey epxoy powder coating,thickness min.60μm (as you requirement)
    payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity.
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • En877 Sml Hubless Cast Iron Pipe

    En877 Sml Hubless Cast Iron Pipe

    Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.

    The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing.
  • Sml Epoxy Cast Iron Pipes —Hubless Sml 88°Single branch

    Sml Epoxy Cast Iron Pipes —Hubless Sml 88°Single branch

    China supplier EN877 SML single branch

    Degree: 88°
    Size: DN50-DN300
    Standard: EN877
    Material: Grey iron
    Application: Construction drainage,pollution discharge,waste water rain water
    Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
    Payment term: T/T, L/C, or D/P
    Production capacity: 1500 tons/ month
    Delivery time: 20-30 days, depend on your quantity
    MOQ: 1*20 container
    Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
  • Special Design for Steel Coupling Sml Kombi Kralle

    Special Design for Steel Coupling Sml Kombi Kralle

    Name: cast iron pipe No-hub coupling for sml
    Size: DN40-300
    Material: stainless steel
    Standard: EN877
    installation: drainage pipe SML pipe
    Package: box
    Delivery: by sea
    Shelf life: 50 years
  • 2023 High quality En877 Cast Iron Pipes–No Hub Sml 88° Large Bend

    2023 High quality En877 Cast Iron Pipes–No Hub Sml 88° Large Bend

    Cast Iron SML 88°Large bend

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Agrement EN 877
  • 100% Original Sml En877 Hubless Cast Iron Pipes and Fittings–No Hub Sml Top Bend

    100% Original Sml En877 Hubless Cast Iron Pipes and Fittings–No Hub Sml Top Bend

    EN877 SML Top bend
    Material: Grey Cast Iron
    Coating: SML,KML,BML,TML
    Product description:The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
  • Bottom Epoxy Cast Iron Pipes

    Bottom Epoxy Cast Iron Pipes

    SML Vent bend
    Material: Grey Cast Iron
    Coating: SML,KML,BML,TML
    Product description:The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
  • En877  Cast Iron Pipe- NoHub Sml 45° Bend

    En877 Cast Iron Pipe- NoHub Sml 45° Bend

    Cast Iron SML 45°Bend Cast iron

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Agrement EN 877
  • High Quality Industrial Commercial Water

    High Quality Industrial Commercial Water

    DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.

    The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.