-
OEM Factory for Pneumatic Quick Fittings Multi-Pipe Air Exhaust Sml Without Connector Aluminum Strip Sml with Connector Air Exhaust Distributor
Used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main soil stack. The 135 degree angle introduces a steeper fall to the horizontal run than a standard 92.5 or 112.5 degree branch. It is most commonly found on the outside wall of a building, often on blocks of flats or apartments. -
Hot sale Factory Centrifugal Cast Iron Soil Pipe with Shielded Coupling
A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. -
EN877 TML Cast Iron Pipe
EN877 TML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge, waste water,rain water
Painting:
Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Professional China Epoxy Coated Cast Iron Pipe with Its Approval
Dinsen supplies full range of EN877 SML drainage cast iron pipe and fittings from DN 50 up to DN 300.
EN877 SML cast iron pipes are suitable for installation inside or outside of buildings for drainage of rainwater and other sewage.
Compared with plastic pipe, SML cast iron pipes and fitting has many advantages, such as environmental friendly and long lifetime, fire protection, low noise, easy to install and maintain.
SML cast iron pipes are internally finished with epoxy coating to prevent from fouling and corrosion.
Inside: fully cross-linked epoxy,thickness min.120μm
Outside: reddish brown base coat,thickness min.80μm -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
One of Hottest for All Size En877 Epoxy Coating Drainage Pipe/Sml Type Pipe
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water.
-
ASTM A888 Cast Iron Pipe
ASTM A888 drainage cast iron pipe fittings
ASTM A888 дренажные фитинги чугунные
Sizes:
degree:
Standard: ASTM A888
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Bitumen
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection
This system is intended for use in non-pressure applications such as sanitary drain, waste, and vent (DWV), sewer, and storm drainage applications.
Dinsen supplies all range of hubless cast iron soil pipe and fittings from DN40 up to DN300. All of our cast iron pipe and fittings are produced severely
according to ASTM A888. It can be used in all type of buildings compatibly. -
OEM Supply Steel Coupling Sml Kombi Kralle
Name: Konfix coupling
German Approval no.: Z-42.5-299
Material: EPDM
Material locking parts: W2, worm thread clamp stainless steel 1.4016,screw free of chrome
Screw size: cross-slit screw, width 7
Torque: ca. 2 Nm
Application: For connecting SML pipes and fittings with other pipe systems(materials) -
Hot Sale for En877 Cast Iron Drainage Soil Pipes-Nohub Sml Reducer
Reducer is used to connect pipes and fittings of different sizes.
Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock. -
SML pipe fitting-Nohub Sml p-Trap
Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap. -
ISO6594/En877/ASTM A888 Hubless Cast Iron Pipes–Bend with door
Bend with door SML
Foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
En877 Kml pipe fittings
KML cast iron pipe fittings EN877
KML фитинги чугунные EN877
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Inside and Outside are grey epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection