-
EN877 BML Bridge Pipe
DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.
-
EN877 TML Cast Iron Pipe
EN877 TML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge, waste water,rain water
Painting:
Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN877 KML pipe fittings
KML cast iron pipe fittings EN877
KML фитинги чугунные EN877
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Inside and Outside are grey epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN877 TML Pipe Fittings
TML cast iron pipe fittings EN877
Sizes: DN40 - DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water,below ground drainage
Painting: Inside and Outside are brown epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
DI Socket fittings
Fittings for socket joints
Collar T type and K type
Double Socket Bend 90° (1/4)
Double Socket Bend 45° (1/8)
Double Socket Bend 22.5° (1/16)
Double Socket Bend 11.25° (1/32)
All socket tee
All socket tee with 45°Angle branch
Double-socket tee with flanged branch
Double socket taper
All socket crossing
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
DI Flanged fittings
Fittings for flanged joints
Double Flanged Bend 90° (1/4)
Double Flanged Duckfoot Bend 90° (1/4)
Double Flanged Long radius Bend 90° (1/4)
Double Flanged Bend 45° (1/8)
Double Flanged Bend 22.5° (1/16)
Double Flanged Bend 11.25° (1/32)
All Flanged tee
All Flanged tee with 45°Angle branch
All Flanged crossing
Double flanged taper
Blank Flange
Reducing Flanges
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
No Hub-SML DS Offset Bend
DS CAST IRON Off-set
Cast Iron Fixed Offset Bend is available with a 130mm projection, and is used to direct a soil system around cornered obstructions, whilst keeping the system parallel. The bend is manufactured to EN877 using solid cast iron and finished with a Epoxy paint coating that complements the aesthetic of period buildings. -
No Hub-SML Cap with Rubber Seal
It is constructed of high quality cast iron. It is easy to install.
For use where a watertight seal is needed -
No Hub-SML 45°Single branch
Used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main soil stack. The 135 degree angle introduces a steeper fall to the horizontal run than a standard 92.5 or 112.5 degree branch. It is most commonly found on the outside wall of a building, often on blocks of flats or apartments. -
No Hub-SML 88°Large Radius Bend with Access Door
SML 88°Large Radius Bend with Access Door, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
-
No Hub-SML 88°Large bend
Cast Iron SML 88°Large bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Agrement EN 877 -
No Hub-SML Top bend
EN877 SML Top bend
Material: Grey Cast Iron
Coating: SML,KML,BML,TML
Product description：The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
© Copyright - 2010-2024 : All Rights Reserved by Dinsen Featured Products - Hot Tags - Sitemap.xml - AMP Mobile
Dinsen aims to learn from world famous enterprise like Saint Gobain to become a responsible, trusty company in China to keep improving the human being life!
