-
EN877 KML pipe fittings
KML cast iron pipe fittings EN877
KML фитинги чугунные EN877
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Inside and Outside are grey epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN877 TML Pipe Fittings
TML cast iron pipe fittings EN877
Sizes: DN40 - DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water,below ground drainage
Painting: Inside and Outside are brown epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
DI Socket fittings
Fittings for socket joints
Collar T type and K type
Double Socket Bend 90° (1/4)
Double Socket Bend 45° (1/8)
Double Socket Bend 22.5° (1/16)
Double Socket Bend 11.25° (1/32)
All socket tee
All socket tee with 45°Angle branch
Double-socket tee with flanged branch
Double socket taper
All socket crossing
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
DI Flanged fittings
Fittings for flanged joints
Double Flanged Bend 90° (1/4)
Double Flanged Duckfoot Bend 90° (1/4)
Double Flanged Long radius Bend 90° (1/4)
Double Flanged Bend 45° (1/8)
Double Flanged Bend 22.5° (1/16)
Double Flanged Bend 11.25° (1/32)
All Flanged tee
All Flanged tee with 45°Angle branch
All Flanged crossing
Double flanged taper
Blank Flange
Reducing Flanges
Others
Socket-spigot fittings
Flanged socket
Flanged spigot
Caps -
No Hub-SML DS Offset Bend
DS CAST IRON Off-set
Cast Iron Fixed Offset Bend is available with a 130mm projection, and is used to direct a soil system around cornered obstructions, whilst keeping the system parallel. The bend is manufactured to EN877 using solid cast iron and finished with a Epoxy paint coating that complements the aesthetic of period buildings. -
No Hub-SML Cap with Rubber Seal
It is constructed of high quality cast iron. It is easy to install.
For use where a watertight seal is needed -
No Hub-SML 45°Single branch
Used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main soil stack. The 135 degree angle introduces a steeper fall to the horizontal run than a standard 92.5 or 112.5 degree branch. It is most commonly found on the outside wall of a building, often on blocks of flats or apartments. -
No Hub-SML 88°Large Radius Bend with Access Door
SML 88°Large Radius Bend with Access Door, foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases.
-
No Hub-SML 88°Large bend
Cast Iron SML 88°Large bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Agrement EN 877 -
No Hub-SML Top bend
EN877 SML Top bend
Material: Grey Cast Iron
Coating: SML,KML,BML,TML
Product description：The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting. -
No Hub-SML Vent bend
SML Vent bend
Material: Grey Cast Iron
Coating: SML,KML,BML,TML
Product description：The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
-
No Hub-SML 45°Bend
Cast Iron SML 45°Bend Cast iron
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Agrement EN 877