• linkedin
  • facebook
  • twitter
Serves premium cast iron solution providers.
Link

Products

  • No Hub-SML Vent bend

    No Hub-SML Vent bend

    SML Vent bend
    Material: Grey Cast Iron
    Coating: SML,KML,BML,TML
    Product description:The pipe fittings have smooth surface, high density and strength, reasonable design in structure, beautiful externality used on high buildings and environmental protecting.
  • No Hub-SML 45°Bend

    No Hub-SML 45°Bend

    Cast Iron SML 45°Bend Cast iron

    Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations

    High strength, low maintanence system
    Quick to assemble
    Agrement EN 877
  • floor drain

    floor drain

    A floor drain is a plumbing fixture that is installed in the floor of a structure, mainly designed to remove any standing water near it.
    Floor drain DN200*100
  • No Hub-SML 88° Bend with 250mm

    No Hub-SML 88° Bend with 250mm

    Dimensions
    Size : 250mm
    Bend Angle : 88°

    Description
    Easy to install our Sewer drainage range includes solid pipe and fittings. A combined lip and compression seal into its solid pipe which is secure against dislodgement and makes jointing easier ensuring that joints remain leak free for years to come.
  • No Hub-SML 45° bend with 250mm

    No Hub-SML 45° bend with 250mm

    Dimensions
    Size : 250mm
    Bend Angle : 45°

    Description
    Easy to install our Sewer drainage range includes solid pipe and fittings. A combined lip and compression seal into its solid pipe which is secure against dislodgement and makes jointing easier ensuring that joints remain leak free for years to come.
  • EN877 BML Pipe Fittings

    EN877 BML Pipe Fittings

    DS MLB (BML) Bridge drainage pipe fittings is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.

    The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.



  • EN598 DI Pipe

    EN598 DI Pipe

    Ductile iron pipes and fittings

    Pipe Size: DN80-DN1000
    Fittings Size: DN80-DN1600
    Ductile Iron Pipe: 150,000 Tons/Year
    Surface Treating: Bitumen coating
    Epoxy coating (Blue and Red color)
    Seal coating (On the cement surface)
    Standards: ISO2531; EN545, EN598;
    Zinc coating: Standard: ISO8179
    Average Mass ≥130g/㎡;
    Partial Lowest : ≥ 110g/㎡
    Mass Can be Customized:200g/m2 400g/m2 Zn-Al alloy