-
No Hub-SML Reducer
Reducer is used to connect pipes and fittings of different sizes.
Cast iron fittings such as bends, branches and reducers, we also supplies special fittings for the connection of toilets and wash basins, siphons, inspection pipes, down pipe supports and connection pieces of other pipe materials, normally from stock. -
Hubless-SML Double branch 68°/88°
Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting together multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, bringing a number of rainwater or above ground drainage runs together into a single soil stack.
Two different angles are available in the option, these being 68 and 88 degrees. -
Hubless-SML 88°Single branch
China supplier EN877 SML single branch
Degree: 88°
Size: DN50-DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: inside and outside fully cross-linked epoxy,thickness min.60μm
Payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
No Hub-SML Bend with door
Bend with door SML
Foul and surface water drainage system
Includes a wide variety of components, such as Bends, Junctions, Rodding Access and Access Fittings, together with Inspection Chambers and Manhole Bases. -
No Hub-SML 88° Bend
Cast Iron SML 88°Bend
Cast Iron SML is a dry-jointed, lightweight cast iron drainage system, primarily used for above ground soil and waste drainage but also for rainwater installations
High strength, low maintanence system
Quick to assemble
Standard：EN877 -
No Hub-SML Double short bend 88°
EN877 cast iron fitting double short bend 88°
EN877 чугунные арматуры двойной короткий изгиб 88°
degree： 88°
size： DN50-DN300
Standard： EN877
Material： Grey iron
Application： Construction drainage,pollution discharge,waste water rain water
Painting： inside and outside fully cross-linked epoxy,thickness min.60μm
payment term： T/T, L/C, or D/P
Production capacity： 1500 tons/ month
Delivery time： 20-30 days, depend on your quantity.
MOQ： 1*20 container
Features： Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
Flange ring
A Ring Type Joint Flange is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. -
No Hub-SML 45° Double Branch
Double branch.
45° between pipe and branches.
Designed in accordance with standard EN877，used for connection between pipes and pipes. -
EN877 BML Bridge Pipe
DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.
-
EN877 TML Cast Iron Pipe
EN877 TML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge, waste water,rain water
Painting:
Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN877 KML pipe fittings
KML cast iron pipe fittings EN877
KML фитинги чугунные EN877
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water
Painting: Inside and Outside are grey epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN877 TML Pipe Fittings
TML cast iron pipe fittings EN877
Sizes: DN40 - DN300
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge,waste water rain water,below ground drainage
Painting: Inside and Outside are brown epxoy powder coating,thickness min.60μm (as you requirement)
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection