-
Coupling Rapid
Enw: ffitiadau pibell haearn bwrw cyplu cyflym
Maint
Deunydd: dur gwrthstaen
Safon:
gosodiad
Pecyn: crât pren
Dosbarthu: ar y môr
Oes
Math B: cyplu cyflym
Maint: DN40 i DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Gafael coler
Enw: pibell haearn bwrw Cyplydd dim canolbwynt ar gyfer sml
Maint: DN40-300
Deunydd: dur gwrthstaen
Safon: EN877
gosodiad
Pecyn: blwch
Dosbarthu: ar y môr
silff: 50 mlynedd -
Cyplu Konfix
Enw: Cyplu Konfix
Rhif Cymeradwyo Almaeneg: Z-42.5-299
Deunydd: EPDM
Rhannau cloi deunydd: W2, clamp edau llyngyr dur gwrthstaen 1.4016, sgriw yn rhydd o grôm Maint sgriw
: sgriw traws-hollt, lled 7
Torque: ca.
: Ar gyfer cysylltu pibellau a ffitiadau SML â systemau pibellau eraill (deunyddiau) -
Clampiau EN877
Enw: clampiau ffitiadau pibell haearn bwrw
Maint: DN40-300
Deunydd: dur gwrthstaen
Safon: EN877
gosodiad
Pecyn: crât pren
Dosbarthu: ar y môr
silff: 50 mlynedd -
Cyplysu CV CHA
Enw: pibell haearn bwrw Cyplydd dim canolbwynt ar gyfer sml
Maint: DN40-300
Deunydd: dur gwrthstaen
Safon: EN877
gosodiad
Pecyn: blwch
Dosbarthu: ar y môr
silff: 50 mlynedd -
Clamp trwm
Enw: ffitiadau pibell haearn bwrw clamp trwm
Maint: DN40-300
Deunydd: dur gwrthstaen
Safon: EN877
gosodiad
Pecyn: crât pren
Dosbarthu: ar y môr
silff: 50 mlynedd
