-
Coupling Rapid
Nimi: malmist toruliitmikud kiirliitmik SML
Suurus: DN40-300
Materjal: roostevaba teras
Standard: EN877
paigaldus: roostevabast terasest
Pakend: puitkast
Tarne: meritsi
Kõlblikkusaeg: 50 aastat
Tüüp B: kiirliitmik
Suurus: DN40 kuni DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Kaelarihm
Nimi: malmist toru SML-
rummuta
Materjal: roostevaba teras
Standard: EN877
paigaldus: drenaažitoru SML-toru
Pakend: karp
Tarneaeg: meritsi
Kõlblikkusaeg: 50 aastat -
Konfix sidestus
Nimi: Konfix-haakeseadis
Saksa tüübikinnitusnumber: Z-42.5-299
Materjal: EPDM
Materjali lukustusosad: W2, usskeerme kinnitusklamber roostevabast terasest 1.4016, kruvivaba kruvi
Kruvi suurus: ristlõikega kruvi, laius 7
Pöördemoment: ca. 2 Nm
Rakendus: SML-torude ja liitmike ühendamiseks teiste torusüsteemidega (materjalid) -
EN877 klambrid
Nimi: malmist toruliitmike klambrid SML
rummuta
Materjal: roostevaba teras
Standard: EN877
paigaldus: roostevabast terasest
Pakend: puitkast
Tarneaeg: meritsi
Kõlblikkusaeg: 50 aastat -
CHA CV sidestus
Nimi: malmist toru SML-
rummuta
Materjal: roostevaba teras
Standard: EN877
paigaldus: drenaažitoru SML-toru
Pakend: karp
Tarneaeg: meritsi
Kõlblikkusaeg: 50 aastat -
Raske klamber
Nimi: malmist toruliitmikud raske klamber SML
rummuta
Materjal: roostevaba teras
Standard: EN877
paigaldus: roostevabast terasest
Pakend: puitkast
Tarneaeg: meritsi
Kõlblikkusaeg: 50 aastat
