-
Coupling Rapid
Naziv: cijevni okovi od lijevanog željeza brza spojnica SML
Veličina: DN40-300
Materijal: nehrđajući čelik
Standard: EN877
ugradnja: spojnica od nehrđajućeg čelika
Paket: drveni sanduk
Dostava: morem
Rok trajanja: 50 godina
Tip B: brza spojnica
Veličina: DN40 do DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Držač ovratnika
Naziv: cijev od lijevanog željeza Spojka bez glavčine za sml
Veličina: DN40-300
Materijal: nehrđajući čelik
Standard: EN877
ugradnja: drenažna cijev SML cijev
Paket: kutija
Dostava: morskim
rokom trajanja: 50 godina -
Konfix spojnica
Naziv: Konfix spojnica
njemački br. Odobrenja: Z-42.5-299
Materijal: EPDM
Dijelovi za zaključavanje materijala: W2, stezna pužni navoj nehrđajući čelik 1.4016, vijak bez kroma
Veličina vijka: vijak s poprečnim prorezom, širina 7
Okretni moment: ca.
: za spajanje SML cijevi i okova s drugim cijevnim sustavima (materijalima) -
EN877 stezaljke
Naziv: stezaljke za cijevi od lijevanog željeza SML
Veličina: DN40-300
Materijal: nehrđajući čelik
Standard: EN877
ugradnja: spojnica od nehrđajućeg čelika
Paket: drveni sanduk
Dostava: morskim
rokom trajanja: 50 godina -
CHA CV spojnica
Naziv: cijev od lijevanog željeza Spojka bez glavčine za sml
Veličina: DN40-300
Materijal: nehrđajući čelik
Standard: EN877
ugradnja: drenažna cijev SML cijev
Paket: kutija
Dostava: morskim
rokom trajanja: 50 godina -
Teška stezaljka
Naziv: cijevni okovi od lijevanog željeza teška stezaljka SML
Veličina: DN40-300
Materijal: nehrđajući čelik
Standard: EN877
ugradnja: spojnica od nehrđajućeg čelika
Paket: drveni sanduk
Dostava: morskim
rokom trajanja: 50 godina
