-
Coupling Rapid
Найменування: чавунні трубопровідні фітинги швидкої муфти SML
Розмір: DN40-300
Матеріал: нержавіюча сталь
Стандарт: EN877
монтаж: муфта з нержавіючої сталі
Пакет: дерев'яна обрешітка
Доставка: морем
Термін придатності: 50 років
Тип B: швидка муфта
Розмір: DN40 до DN200 -
American Hose Clamp Type Throat Hoop
The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.
Product presentation:
1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.
The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
It is mainly divided into British, American, and German three types.
American throat band: divided into iron plating galvanized and stainless steel two kinds.
All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product. -
Комірний захват
Найменування: чавунна труба Муфта без ступиці для sml
Розмір: DN40-300
Матеріал: нержавіюча сталь
Стандарт: EN877
монтаж: дренажна труба Труба SML
Пакет: коробка
Доставка: морем
Термін придатності: 50 років -
Муфта Konfix
Найменування: Німецька муфта Konfix Номер
схвалення: Z-42.5-299
Матеріал: EPDM
Матеріал запірних деталей: W2, затискач для черв'ячної різьби нержавіюча сталь 1.4016, гвинт без хрому
Розмір гвинта: поперечний гвинт, ширина 7
Крутний момент: приблизно
: для з’єднання труб і фітингів SML з іншими трубопроводами (матеріалами) -
EN877 затискачі
Назва: чавунні фітинги для трубопроводів SML
Розмір: DN40-300
Матеріал: нержавіюча сталь
Стандарт: EN877
монтаж: муфта з нержавіючої сталі
Пакет: дерев'яна обрешітка
Доставка: морем
Термін придатності: 50 років -
CHA CV муфта
Найменування: чавунна труба Муфта без ступиці для sml
Розмір: DN40-300
Матеріал: нержавіюча сталь
Стандарт: EN877
монтаж: дренажна труба Труба SML
Пакет: коробка
Доставка: морем
Термін придатності: 50 років -
Важкий затискач
Назва: чавунні трубопровідні фітинги важкий затиск SML
Розмір: DN40-300
Матеріал: нержавіюча сталь
Стандарт: EN877
монтаж: муфта з нержавіючої сталі
Пакет: дерев'яна обрешітка
Доставка: морем
Термін придатності: 50 років