• linkedin
  • facebook
  • twitter
Iservi fornituri ta 'soluzzjoni tal-ħadid fondut premium.
Link

Twaħħil tal-pajp u Clamp ta 'Appoġġ

  • Coupling  Rapid

    Coupling Rapid

    Isem: aċċessorji tal-pajpijiet tal-ħadid fondut igganċjar rapidu
    Daqs
    Materjal: azzar li ma jissaddadx
    Standard: EN877
    installazzjoni: igganċjar tal-istainless steel
    Pakkett: ċestun tal-injam
    Kunsinna: bil-baħar
    Żmien kemm idum tajjeb

    Tip B: igganċjar rapidu
    Daqs: DN40 sa DN200
  • American Hose Clamp Type Throat Hoop

    American Hose Clamp Type Throat Hoop

    The American cross throat tube stock is also known as the American Hose Clamp Type Throat Hoop. The throat hoop is small, low price, but the effect is huge. American stainless steel throat hoop is divided into big American and small American band, broadband is 12.7mm and 14.2mm respectively. This product is suitable for 30mm, beautiful appearance after assembly. It is characterized by small worm friction, suitable for high-grade models, rod holding equipment, steel pipe and hose or anti-corrosion material part connection.

    Product presentation:
    1.laryngeal hoop screw to "stainless steel one word" "iron nickel cross" "stainless steel cross" three categories.
    2.Use of 304 stainless steel. The inscription "304 52-76" indicates that the product uses 304 stainless steel, with a minimum diameter of 52 and a maximum diameter of 76.
    3.The product has a steel strip width of 11.95mm and is 0.68mm thick.
    4.On the market, this product is generally 0.6-0.65mm thickness, our this thickness is 0.6-0.8mm.
    5.This hoop clamp is available in a variety of styles, made of 304 stainless steel, so that the product has good permeability resistance, corrosion resistance, heat resistance, low temperature strength and other mechanical properties.

    The throat hoop is widely used in automobiles, tractors, forklifts, locomotives, ships, mines, oil, chemical, pharmaceutical, agriculture and other water, oil, steam, dust, etc., is the ideal connection fastener.
    It is mainly divided into British, American, and German three types.
    American throat band: divided into iron plating galvanized and stainless steel two kinds.
    All models reach the export level, with the hardness, wear resistance and high temperature resistance added to extend the service life of the product.
  • Qabda tal-għenuq

    Qabda tal-għenuq

    Isem: pajp tal-ħadid fondut Igganċjar bla buttun għal sml
    Daqs: DN40-300
    Materjal: azzar inossidabbli
    Standard: EN877
    installazzjoni
    Pakkett: kaxxa
    Kunsinna: bil-baħar
    prodott: 50 sena
  • Igganċjar Konfix

    Igganċjar Konfix

    Isem: Konfix coupling
    Ġermaniż Nru ta 'Approvazzjoni: Z-42.5-299
    Materjal: EPDM
    Materjal partijiet li jissakkru: W2, morsa tal-ħajt tad-dudu azzar li ma jissaddadx 1.4016, kamin ħieles mill-kromju
    Daqs tal-kamin: kamin ta' qasma trasversali, wisa '7
    Torque: ca.
    : Għall-konnessjoni ta' pajpijiet SML u fittings ma 'sistemi oħra ta' pajpijiet (materjali)
  • Klampi EN877

    Klampi EN877

    Isem: fittings tal-pajpijiet tal-ħadid fondut klamps
    Daqs: DN40-300
    Materjal: azzar inossidabbli
    Standard: EN877
    installazzjoni: igganċjar tal-istainless steel
    Pakkett: ċestun tal-injam
    Kunsinna: bil-baħar
    prodott: 50 sena
  • Igganċjar CV CHA

    Igganċjar CV CHA

    Isem: pajp tal-ħadid fondut Igganċjar bla buttun għal sml
    Daqs: DN40-300
    Materjal: azzar inossidabbli
    Standard: EN877
    installazzjoni
    Pakkett: kaxxa
    Kunsinna: bil-baħar
    prodott: 50 sena
  • Morsa tqila

    Morsa tqila

    Isem: aċċessorji tal-pajpijiet tal-ħadid fondut morsa tqila SML
    Daqs: DN40-300
    Materjal: azzar inossidabbli
    Standard: EN877
    installazzjoni: igganċjar tal-istainless steel
    Pakkett: ċestun tal-injam
    Kunsinna: bil-baħar
    prodott: 50 sena